Lucent Technologies Enterprise Communications Server Comcode 108678723 Manuel d'utilisateur télécharger pdf (Page 113)

DEFINITY ECS Release 8.2 ATM Installation,

Upgrades, and Administration

555-233-124

Issue 1

April 2000

Administering ATM-PNC and ATM-CES

5-15Administering DEFINITY ECS

27. Verify channel

settings

Go to screen 2; Screen 5-7 displays.

Depending on the settings in step 18:

■ If Circuit Type field is set at T1, then channel 24 is

populated.

■ If Circuit Type field is set at E1, then channel 16 is

populated.

Other details about D-channels:

■ All ports for one signaling group must be on the same

ATM circuit pack (the same circuit pack that the D

channel is on).

■ The D-channel port is never assigned to a trunk group.

Because they are all the same, the administrator does

not need to type in the circuit pack location for each

channel.

■ No port can be assigned to more than one signaling

group.

28. Type port numbers Add the port numbers (minimum of 6) from the

port-to-channel mapping on signaling group screen 2.

See ‘‘Changing the port-to-channel mapping’’ on page 5-22

if you need to change any administration.

When finished, press

Enter to save the administration.

29. Administer the trunk

group

Ty p e add trunk-group

trkgrpnbr

and press Enter.

Screen 3-5

displays.

Table 5-8. ATM-CES administration — Continued

√ Step Action Description

Continued on next page

1 2 ... 108 109 110 111 112 113 114 115 116 117 118 ... 229 230

Pas de commentaire

Lucent Technologies Enterprise Communications Server Comcode 108678723 Manuel d'utilisateur Page 113